Upgrades Performed, New System is Functional!

 I posted earlier in the week that I'd bought parts for a new system.  

I'd said that I'd wait for the weekend to strip down my current system and replace the motherboard and supporting parts (GPU, CPU, memory).  Well, I couldn't wait.  The CPU HSF and memory arrived yesterday and waited an hour or two after they arrived to begin the rebuild.

I'd not done this in awhile but it wasn't all that difficult, but was sort of a pain in the ass.  I basically had to strip down the old motherboard while leaving the rest of the system attached to the case, then remove the motherboard, then attach the new CPU to the new motherboard, then attach the CPU HSF to the system, then attach the RAM to the motherboard, attach the back IO panel to the case, then mount the motherboard to the case, then plug in the motherboard power connectors and the rest of the cabling.  I also had to try to ensure wires and cables weren't interfering with the cooling fans.  Some of the wires are very long and some are also very short, so I spent some time trying to route things...I'm probably going to have to revisit this, as I could spend a whole day trying to route and secure cabling using zip ties.

The PowerColor video card was a beast!  I thought my GTX1060 was big.  This one is a bit bigger.  I didn't know it had blue lighting, which enhances the blue lighting I already have in the case.

When I booted up the system with the new parts, I honestly thought it wouldn't boot because of something I'd forgotten.  At least the PSU is sufficiently powerful.  It immediately booted up but was complaining because it couldn't control the CPU fan - I'd plugged it into the wrong outlet, so I had to fix that.  It was a bit of a pain because I'd used a hot glue gun to secure the wires to the frame of the HSF - I had to remove the glue to reroute the cabling and then reglue the cabling so that it wouldn't get caught in the CPU fan.

The system is ultra quick now.

I played a few matches of War Thunder last night and noticed that the system was complaining that Windows wasn't activated.  I'd saved my product key from when I'd upgraded to Windows 10 but the damned key wasn't working.  Apparently, I'd nullified it when I added the new hardware.  It took me maybe 15 minutes to fix that.

I also downloaded and installed the latest RX 6600 drivers.

At some point, I'll probably wipe the drive and reinstall Windows and all of my games and hardware, but for now everything works.

I still need to do some things like find another area to mount my SSD drives, as they're in the way in case I want to add additional USB 3.0 ports in back.  I may end up buying a new case, though...this one is a bit cluttered.

Here's to another seven years!  :D

Gaming Desktop Upgrade

I came into a bit of money and instead of doing what I normally do (spend extra money on firearms or ammo or anything supporting firearms), I decided to upgrade my video card in my desktop system, since I've been having issues playing a particular VR game, a light flight sim called VTOL VR.

What started the desktop system upgrade process was the fact that I couldn't upgrade my video card to the latest-greatest, since my current motherboard only supported PCIe 3.0 x16.

This meant that I wouldn't be able to upgrade the video card to the RTX 2060 or any RTX card above 2060, as most current graphics cards are PCIe 4.0.

The motherboard that I'm currently using is the MSI Z87-G41 PC Mate, which is a motherboard that supports the following:

• Supports 4th Generation Intel® Core™ i7 / Core™ i5 / Core™ i3 / Pentium® / Celeron® processors for LGA 1150 socket.
• Uses the Z87 Express chipset.
• CPU currently being used: Intel(R) Core(TM) i5-4690K CPU @ 3.50GHz

I also just now realized that this particular system is 7 years old!  And when I bought the above MSI motherboard, that motherboard wasn't cutting-edge.  In fact, there will be no Microsoft Windows 11 support for the i5 CPU I'm currently using. I will probably move it to another system and use it with Linux.

So, what started out as a GPU upgrade developed into a motherboard, CPU, and GPU upgrade, since I would need to upgrade the motherboard to use a PCIe 4.0 GPU and since I would need to buy a new CPU to use with the new motherboard.

I spent this weekend looking at motherboard/CPU packages at NewEgg and Microcenter (which is local to me).  I also looked and found an ideal GPU.

The problem with shopping for computer parts during Covid-19 times is that nothing stays in stock for long.  Also, there's a shortage of chips for GPUs, so GPUs are very expensive right now.  I could've waited but Covid is 2+ years long-in-the-tooth right now...could be a very long wait, while prices could keep climbing.  Microcenter isn't allowing online purchases of GPUs so I'd have to physically purchase the product.  NOTE:  While I hate that stores aren't selling GPUs online and that to buy them, you've to visit the brick/mortar store, it does lessen scalping and folks mass buying GPUs for cryto mining.  Also, I found that what was showing as in-stock was showing as out-of-stock after several hours of checking, and this occurred with the motherboard/CPU and GPU items I'd bookmarked (was researching so that I knew what to buy when I visited Microcenter the next day.

So, on Sunday, I did another quick search and found that NO i5 CPUs were in stock, which meant that I had to re-search for another combination that wasn't i5-related.  So, I stepped up to an i7 CPU.  

Also, there were no more Nvidia GPUs within my price range and I was NOT going to spend $800 on a card!  So, I changed up after doing a bit of research and decided to get an ATI video card instead.

Here's what I ended up getting:

• PowerColor AMD Radeon RX 6600 Hellhound Dual-Fan 8GB GDDR6 PCIe 4.0 Graphics Card
• Intel Core i7-10700K Comet Lake 3.8GHz Eight-Core LGA 1200 Boxed Processor - Heatsink Not Included
• ASUS Z590-P Prime Intel LGA 1200 ATX Motherboard

Because of the issue of every single part I selected repeatedly going out of stock over the course of two days, I ended up going over budget by like $250!  I was very close to just calling the whole thing off...it was an extremely frustrating situation.

I also realized before going to purchase the parts that I'd also need to buy new memory, as the new motherboard required DDR4.  I decided that I could buy that online via Amazon.com and would probably be able to find good bargains, so I held off on buying that at Microcenter.

I bought the parts and when I got home, I looked at the CPU.  The damned thing didn't come with a HSF (heatsink/fan).  Looking online for a HSF for an 11th gen i7 was daunting.  I'd selected to buy either the:

• Cooler Master Hyper 212 Evo v2
• Cooler Master Hyper 212 Black Edition.  

I wanted to see how large they were before purchasing and I'm glad I checked because both of those were EXTREMELY large.  These two HSFs are overkill for someone who won't overclock.

I actually settled on the Intel BXTS15A HSF assembly air cooled instead.  It should arrive in 2 days.

For RAM, I bought the following:  NVTEK 16GB DDR4-2933 Desktop PC RAM Memory.  It should arrive in 2 days, also.

About the only thing I haven't had to buy is a new power supply unit (PSU) and a new case.  I already have a good display, a Samsung 34" UltraWQHD 1440p screen (LS34J552WQNXZA).  There's the possibility that I'll have to buy a larger PSU but I'll do that only when I see that I'll need to do it.  Hopefully, I won't have to upgrade the PSU.  The current PSU I'm using is a Corsair CX750M, which may well be sufficient for the CPU and GPU I bought.  If I need to upgrade, I'll probably buy the PSU locally, as I bought the Corsair from Best Buy locally seven years ago.

I'll begin the build this coming weekend, which will give me a bit of time to backup important things to my NAS.

So, what I thought was going to be a simple $400 GPU upgrade will probably end up being a $1000+ upgrade of 5 essential (and expensive) parts. :/

At least I won't have to worry about this for another 7 years.  :)

Lollipop!

So, both of my phones (work and personal) got upgraded (OEM -- I don't root or try various ROMs on my phones...I need them to be dependable and as stock as possible) to Android 5.0 within the last seven days.

There are distinct differences in the UI between them, with the work phone being an HTC One M8 and the personal phone being a Samsung Galaxy Note 3 (both Verizon phones).

I was underwhelmed with the One, but I also don't usually tinker with it since it's the work phone, so I can't really notice the new changes since I wasn't really familiar with the old options and features.

With the Note 3, there's a slew of UI changes, but I don't see much difference in the system options/configuration.  I've not yet noticed things such as excessive battery usage or bad phone reception.  I did notice that I had to re-enable some of the features I had selected prior to the Lollipop upgrade.  I also noticed an easter egg.  If you go to Settings/General/About Phone, click "Android version" multiple times, click the lollipop multiple times, then click/hold, you'll see a version of the Flappy Bird game and be able to play it!  There are some new features in the Security settings, too, like reactivation lock, "Send security reports" and "Security policy updates."

I'll report any anomalies or good stuff I discover.


UPDATE:  And I saw this article today, showing how much of a dramatic difference each Android 5.0 experience is per device.  It's good to know I wasn't the only one that noticed this.  A snippet:

This dive into Lollipop revealed something very clear to me: Manufactures are, in fact, doing Android no favors. I've already posted my take on bloatware, and I stand firm on that with Lollipop. But even minus what most would consider bloatware, manufacturers are robbing consumers of the true Android experience, and Lollipop is a perfect example of that.

Anyone who experiences the jump from KitKat to Lollipop should get the platform I had on the Nexus, rather than the HTC M8. After the very long wait for the Lollipop upgrade, some users are going to be disappointed--not because of what Google has done (because what Google has done is brilliant), but because of what the manufacturers have done to the latest iteration of Android.

I agree.

Wordpress Woes

I did a dumb thing last week.

I'd been holding back on upgrading my Ubuntu server to 14.04...for good reason:  I was running software versions that weren't compatible with my version of Ubuntu.

Well, I upgraded anyways (after months of holding off).  It broke my web server and also reverted my Wordpress site back a few versions (3.8.x or something like that...I'd been running version 4.0).

That was this past Saturday.  Today is Tuesday afternoon and I'm almost finished restoring the site.

Things that broke:

Wordpress
PSAD
Apache

I'm going to specifically speak to Wordpress now.

This was actually an Apache/Wordpress combination issue.  I believe the version that Apache was upgraded to was 2.4.x.  It changed the default webserver location from /var/www to /var/www/html, which broke a LOT of my content.  The fix was easy:  I moved everything from /var/www to /var/www/html, ensuring the file and directory permissions didn't change.

Then, I found a multitude of issues with my Wordpress site's content:

1. All image links broke, meaning they wouldn't render, even after moving content to /var/www/html (but I could upload new pictures without issue -- and they'd render).
2. I couldn't perform upgrades to v4.0 via the GUI.
3. I couldn't install new plugins.
4. I couldn't install templates.

First thing I did was upgrade (manually, via CLI) to v4.0.  That cleared up some issues.

Next, I worked on trying to get the plugins to work.  I couldn't install new plugins.  I also couldn't update old plugins to new versions.  The error I would get was, "Unable to locate Wordpress content directory".  I'd also get "Unable to locate Wordpress plugin directory".  What I did was download (via web browser) the "third party host fix" plugin.  I loaded it to my Ubuntu server via SCP.  I then unzipped it, and moved the uncompressed directory to the plugins folder.  It still wouldn't work.  I found that a symlink was missing from /var/lib/wordpress/wp-content/plugins, so I created a new one:

lrwxrwxrwx 1 root root 60 Sep 30 19:48 third-party-host-fix -> /usr/share/wordpress/wp-content/plugins/third-party-host-fix

That's linked to /usr/share/wordpress/wp-content/plugins/third-party-host-fix...that also the directory where the actual plugin content is located.

After I did that, I was able to see the plugin in the UI.  I activated it successfully.  I then tried to update a plugin...I got a different error:  "Wordpress could not create directory".  Ugh...

I found the solution on how to fix that issue at https://help.ubuntu.com/community/WordPress.  I went to /usr/share/wordpress/wp-config.php and edited the following:

Changed:

define('WP_CONTENT_DIR', '/var/lib/wordpress/wp-content');

to read:

define('WP_CONTENT_DIR', '/var/www/wordpress/wp-content');

That fixed the issues of installing or updating templates and plugins.

The only issue I need to resolve now is the image rendering issue, but I think I'll just reload all the images, one at a time (there aren't all that many, I believe).

This was a horrible experience but the benefit was that it got me to delve and fix the issue (vs. just wiping everything and reinstalling the whole distribution).

UPDATE:

New issues --

1. Can't remove plugins.  Error message:  "Plugin could not be deleted due to an error: Unable to locate WordPress Plugin directory."
2. Using Photo Gallery plugin - galleries will render but the images will not show within the gallery UI.  I also can't seem to view the images via browser...may be another incorrect coding issue or even a permissions issue.

UPDATE 2:

1. I've fixed the issue with the Photo Gallery plugin.  I basically dumped the picture back in the directory where the plugin was looking for them (/usr/share/wordpress/wp-content/uploads/photo-gallery).  I hate how hodge-podge this is...crap is everywhere without standardization, but I'm to the point where I just want the site functional again.  I just hope things don't break when I next upgrade Wordpress.
2. I'll look into the "can't remove plugins" issue tomorrow.

iMac Repaired

I got my iMac back last Thursday, but was unable to do anything more than pick it up from the Apple Store, since I had to immediately go on bereavement leave.  I got back home today and I've just now finished installing Mountain Lion.  It is NICE!

Yes, my hard disk had to be replaced, but I've verified that S.M.A.R.T. isn't showing errors.  I'm now installing patches and will go through Time Machine to determine what I wanted restored to the drive...this'll be a week-long process.

So, stay tuned for whining and praises of Mountain Lion!

Legacy Macbook Woes

I got the Macbook back in 2006, I believe.  It's pre-C2D and apparently doesn't support 64-bit OSs.  My wife's computer is C2D (mine is Core Duo), so her CPU is 64-bit...the motherboard probably doesn't support 64-bit, though.  I'd try to install Lion on it but she'd kill me.  It took her awhile to get used to Snow Leopard when I upgraded it without her consent (LOL).

So....

http://www.glitch.com/forum/general/11684/#reply-122479:

"The issue I experience with this is that I have one of the first intel core duo macs. This means that the max memory it can handle is 2 gigs. This means that the mac cannot handle running 10.6 even though it has 64-bit capable processors. This means that my mac is stuck at 10.5.8 until it breaks and I am forced to buy a new iMac (a few thousand dollars I do not want to spend until I have to since the iMac still does everything that I need it to). This is not a huge deal for me since I have 2 Windows machines and 1 Linux machine that run Glitch perfectly, but if anyone else has this issue and therefore is unable to use Flash 11, please post here so the devs have a better idea of usage statistics and can make a decision as to wether or not it is worth dedicating resources to allow people to play the game with Flash 10 with the caveat that it may not work right."

Yeah, I'm pretty much stuck in the same situation as the above, although a reply to the above hinted at a workaround:

http://www.glitch.com/forum/general/11684/#reply-122489:

Landar, first off your Mac will run *better* under 10.6 than 10.5, with the same hardware you have right now. I've done that with MacBooks and iMacs of that generation.
Second, almost all the C2D Macs can actually handle 3-and-a-bit gig (it's the usual Intel motherboard limitations) or even four, look up your system at www.everymac.com/systems/by... and click through to the details page.

So, there may be hope after all.  I'll need to look into this.